Large Animal Translational Validation of 3 Mitral Valve Repair Operations for Mitral Regurgitation Using a Mitral Valve Prolapse Model: A Comprehensive In Vivo Biomechanical Engineering Analysis.

BACKGROUND: Various mitral repair techniques have been described. Though these repair techniques can be highly effective when performed correctly in suitable patients, limited quantitative biomechanical data are available. Validation and thorough biomechanical evaluation of these repair techniques from translational large animal in vivo studies in a standardized, translatable fashion are lacking. We sought to evaluate and validate biomechanical differences among different mitral repair techniques and further optimize repair operations using a large animal mitral valve prolapse model. METHODS: Male Dorset sheep (n=20) had P2 chordae severed to create the mitral valve prolapse model. Fiber Bragg grating force sensors were implanted to measure chordal forces. Ten sheep underwent 3 randomized, paired mitral valve repair operations: neochord repair, nonresectional leaflet remodeling, and triangular resection. The other 10 sheep underwent neochord repair with 2, 4, and 6 neochordae. Data were collected at baseline, mitral valve prolapse, and after each repair. RESULTS: All mitral repair techniques successfully eliminated regurgitation. Compared with mitral valve prolapse (0.54±0.18 N), repair using neochord (0.37±0.20 N; P=0.02) and remodeling techniques (0.30±0.15 N; P=0.001) reduced secondary chordae peak force. Neochord repair further decreased primary chordae peak force (0.21±0.14 N) to baseline levels (0.20±0.17 N; P=0.83), and was associated with lower primary chordae peak force compared with the remodeling (0.34±0.18 N; P=0.02) and triangular resectional techniques (0.36±0.27 N; P=0.03). Specifically, repair using 2 neochordae resulted in higher peak primary chordal forces (0.28±0.21 N) compared with those using 4 (0.22±0.16 N; P=0.02) or 6 neochordae (0.19±0.16 N; P=0.002). No difference in peak primary chordal forces was observed between 4 and 6 neochordae (P=0.05). Peak forces on the neochordae were the lowest using 6 neochordae (0.09±0.11 N) compared with those of 4 neochordae (0.15±0.14 N; P=0.01) and 2 neochordae (0.29±0.18 N; P=0.001). CONCLUSIONS: Significant biomechanical differences were observed underlying different mitral repair techniques in a translational large animal model. Neochord repair was associated with the lowest primary chordae peak force compared to the remodeling and triangular resectional techniques. Additionally, neochord repair using at least 4 neochordae was associated with lower chordal forces on the primary chordae and the neochordae. This study provided key insights about mitral valve repair optimization and may further improve repair durability.

[Supra-annular Mitral Valve Replacement Using a Composite Valve for an Infant with Acute Rupture of Chordae Tendineae].

Acute rupture of the chordae tendineae of the mitral valve could lead to severe mitral regurgitation and circulatory collapse in infants. Mitral valve replacement may be often challenging because of the valve-annulus size mismatch in small infants when mitral valve repair cannot be accomplished. We present an infant with acute massive rupture of the chordae tendineae of the mitral valve who successfully underwent supra-annular mitral valve replacement using the short composite valve of an expanded polytetrafluoroethylene( ePTFE) graft and a mechanical valve. His mechanical valve has been functioning without complications such as thrombosis and pulmonary venous obstruction for 20 months after surgery. This technique could be helpful even infants with acute rupture of the chordae tendineae of the mitral valve whose left atrium may not be dilated.

Severe tricuspid regurgitation with chordae tendinae rupture in CABG surgery.

A 58-year-old male patient was admitted with chest pain and was diagnosed with coronary heart disease. He was scheduled for coronary artery bypass grafting (CABG) under cardiopulmonary bypass (CPB). Intraoperative real-time transesophageal echocardiography (TEE) showed that the tricuspid valves were well-aligned and subtle regurgitation. Real-time TEE after separation from CPB showed severe tricuspid regurgitation and prolapsed chordae tendineae. The tricuspid chordae tendineae rupture due to a right atrial venous return cannula. The use of negative pressure to improve venous drainage during CPB may result in the tricuspid valve being adsorbed to the cannula, increasing the likelihood of injury to the tricuspid valve.

Feasibility Study of a Novel Transapical Chordal Implantation System in a Porcine Model.

Transapical beating-heart mitral repair with chordal implantation system has been considered as an alternative treatment for degenerative mitral regurgitation. This study aimed to assess the feasibility and safety of the E-Chord system (Med-Zenith Medical, Beijing, China) for transapical beating-heart mitral valve repair in a porcine model. Artificial chordae were transapically implanted on the mitral valves of 12 anesthetized pigs under epicardial echocardiographic guidance and secured outside the left ventricular apex. The study endpoints included procedural success, device durability, and tissue response to the device. The procedural success rate was 100% (12/12). All animals were implanted with E-Chord in the anterior and posterior leaflets, respectively, and survived uneventfully until euthanized as planned. During the 180-day follow-up, no animal had significant mitral valve dysfunction. The gross observation showed no evidence of anchor detachment and chordal rupture, and there was no obvious damage or changes to mitral leaflets. Microscopic evaluation revealed that the endothelialization of anchor and chordae was completed 90 days after implantation and there was no evidence of chordal rupture, thrombosis, or infection during the 180-day follow-up. The E-Chord system was found to be feasible and safe for heart-beating mitral chordal implantation in a porcine model. The findings of this study suggest that the E-Chord system may be a potential alternative for the treatment of degenerative mitral regurgitation in humans.

Biomechanical engineering analysis of neochordae length's impact on chordal forces in mitral repair.

OBJECTIVES: Artificial neochordae implantation is commonly used for mitral valve (MV) repair. However, neochordae length estimation can be difficult to perform. The objective was to assess the impact of neochordae length changes on MV haemodynamics and neochordal forces. METHODS: Porcine MVs (n = 6) were implanted in an ex vivo left heart simulator. MV prolapse (MVP) was generated by excising at least 2 native primary chordae supporting the P2 segments from each papillary muscle. Two neochordae anchored on each papillary muscle were placed with 1 tied to the native chord length (exact length) and the other tied with variable lengths from 2× to 0.5× of the native length (variable length). Haemodynamics, neochordal forces and echocardiography data were collected. RESULTS: Neochord implantation repair successfully eliminated mitral regurgitation with repaired regurgitant fractions of approximately 4% regardless of neochord length (P < 0.01). Leaflet coaptation height also significantly improved to a minimum height of 1.3 cm compared with that of MVP (0.9 ± 0.4 cm, P < 0.05). Peak and average forces on exact length neochordae increased as variable length neochordae lengths increased. Peak and average forces on the variable length neochordae increased with shortened lengths. Overall, chordal forces appeared to vary more drastically in variable length neochordae compared with exact length neochordae. CONCLUSIONS: MV regurgitation was eliminated with neochordal repair, regardless of the neochord length. However, chordal forces varied significantly with different neochord lengths, with a preferentially greater impact on the variable length neochord. Further validation studies may be performed before translating to clinical practices.

Neochordal Goldilocks: Analyzing the biomechanics of neochord length on papillary muscle forces suggests higher tolerance to shorter neochordae.

OBJECTIVE: Estimating neochord lengths during mitral valve repair is challenging, because approximation must be performed largely based on intuition and surgical experience. Little data exist on quantifying the effects of neochord length misestimation. We aimed to evaluate the impact of neochord length on papillary muscle forces and mitral valve hemodynamics, which is especially pertinent because increased forces have been linked to aberrant mitral valve biomechanics. METHODS: Porcine mitral valves (n = 8) were mounted in an ex vivo heart simulator, and papillary muscles were fixed to high-resolution strain gauges while hemodynamic data were recorded. We used an adjustable system to modulate neochord lengths. Optimal length was qualitatively verified by a single experienced operator, and neochordae were randomly lengthened or shortened in 1-mm increments up to ±5 mm from the optimal length. RESULTS: Optimal length neochordae resulted in the lowest peak composite papillary muscle forces (6.94 ± 0.29 N), significantly different from all lengths greater than ±1 mm. Both longer and shorter neochordae increased forces linearly according to difference from optimal length. Both peak papillary muscle forces and mitral regurgitation scaled more aggressively for longer versus shorter neochordae by factors of 1.6 and 6.9, respectively. CONCLUSIONS: Leveraging precision ex vivo heart simulation, we found that millimeter-level neochord length differences can result in significant differences in papillary muscle forces and mitral regurgitation, thereby altering valvular biomechanics. Differences in lengthened versus shortened neochordae scaling of forces and mitral regurgitation may indicate different levels of biomechanical tolerance toward longer and shorter neochordae. Our findings highlight the need for more thorough biomechanical understanding of neochordal mitral valve repair.

Evaluation of a Novel Automated Suturing Technology for Mitral Chordal Implantation: 1-Year Results.

PURPOSE: A new automated expanded polytetrafluoroethylene (ePTFE) suture placement device and a new customized titanium fastener deployment device were clinically evaluated in open and less-invasive mitral valve repair (MVr). DESCRIPTION: Twelve patients were monitored for 1 year after undergoing MVr using the study devices. The study end points included surgical outcomes, operative times, valve repair durability, adverse events, and mortality. EVALUATION: Three patients received 1 ePTFE chord using the study technology, and 9 patients received 2 chords. Mitral regurgitation at 30 days was absent in 8 patients, trace in 2, and mild in 2. At the 1-year follow-up, mitral regurgitation was absent in 7 patients, trace in 2, mild in 2, and moderate in 1. There were no replacement chord failures, reoperations, or death. CONCLUSIONS: The initial outcomes of new automated ePTFE suture placement and titanium fastener deployment devices encourage further clinical evaluations.

Anatomical Mitral Valve Repair: Mathematical Prediction of Artificial Chordae Length in Para-Commissural Regions.

To develop a mathematical formula for calculating the length of ruptured mitral valve chordae (with a view to surgically replacing them with artificial chordae) when rupture occurs at scallop A1, A3, P1, or P3. We studied human cadaver hearts collected by the Faculty of Medicine at Amiens Picardy University Hospital. The donors' mean age standard deviation age at death was 79 ± 10. After weighing and dissection, we counted the number of para-commissural chordae per scallop and measured their length with a digital calliper. A total of 31 human cadaver hearts (14 from females and 17 from males) were analyzed. The mean lengths of scallops A1, A2, A3, P1, P2, and P3 were 17.45, 19.42, 17.58, 13.32, 14.52, and 13.26 mm, respectively. A linear regression gave the following mathematical equations: A1 = 0.96 × A2- - 1.3 (R: 0.99; P < 0.001); A3 = 0.9 × A2 + 0.17 (R: 0.95; P < 0.01); P1 = 0.87 × P2 +0.74 (R: 0.89; P < 0.001), and P3 = 0.91 × P2 - 0.01 (R: 0.87; P < 0.0001). When the patient's anatomy prevents manual measurements of the chordae during mitral valve repair surgery, the mathematical formulae derived here can be used to predict the length of the chordae on A1, A3, P1, and P3 from the length of the chordae on A2 and P2. The mitral chordae can therefore be replaced with prostheses with a great degree of precision.

Neochordae implantation versus leaflet resection in mitral valve posterior leaflet prolapse and dilated left ventricle: a propensity score matching comparison with long-term follow-up.

OBJECTIVES: Uncorrected severe mitral regurgitation (MR) due to posterior prolapse leads to left ventricular dilatation. At this stage, mitral valve repair becomes mandatory to avoid permanent myocardial injury. However, which technique among neochoardae implantation and leaflet resection provides the best results in this scenario remains unknown. METHODS: We selected 332 patients with left ventricular dilatation and severe degenerative MR due to posterior leaflet (PL) prolapse who underwent neochoardae implantation (85 patients) or PL resection (247 patients) at our institution between 2008 and 2020. A propensity score matching analysis was carried on to decrease the differences at baseline. RESULTS: Matching yielded 85 neochordae implantations and 85 PL resections. At 10 years, freedom from cardiac death and freedom from mitral valve reoperation were 92.6 ± 6.1% vs 97.8 ± 2.1% and 97.7 ± 2.2% vs 95 ± 3% in the neochordae group and in the PL resection group, respectively. The MR ≥2+ recurrence rate was 23.9 ± 10% in the neochordae group and 20.8 ± 5.8% in the PL resection group (P = 0.834) at 10 years. At the last follow-up, the neochordae group showed a higher reduction of left ventricular end-diastolic diameter (44 vs 48 mm; P = 0.001) and a better ejection fraction (60% vs 55%; P < 0.001) compared to PL resection group. CONCLUSIONS: In this subgroup of patients, both neochordae implantation and leaflet resection provide excellent durability of the repair in the long term. Neochordae implantation might have a better effect on dilated left ventricle.

Left Ventricular Septal Avulsion in the Setting of Blunt Cardiac Injury.

A 23-year-old man sustained blunt cardiac injury after a motor vehicle collision resulting in left ventricular septal avulsion, ruptured chordae tendineae, and moderate to severe tricuspid regurgitation that necessitated operative intervention. The patient underwent successful resection of a prolapsed avulsed septal wall segment and concomitant tricuspid valve repair.

An unusual origin of a papillary muscle of the right ventricle.

Knowledge of anatomical variations of the heart are important to cardiac surgeons, cardiologists, and radiologist. During routine dissection of a 77-year-old male cadaver, we observed an unusual origin of a papillary muscle of the right ventricle arising from the atrioventricular aspect of the moderator band. This papillary muscle was 6.7mm long and 2.6mm wide. It gave rise to two chordae tendineae: one to the inferior (posterior) papillary muscle of the right ventricle and one directly to the inferior (posterior) leaflet of the tricuspid valve. Variants of the internal anatomy of the heart as exemplified in the present case report should be born in mind during image interpretation and invasive procedures of the right ventricle of the heart.

Comparison of early and late postoperative outcomes between chordal reconstruction and quadrangular resection in patients with posterior mitral valve prolapse: a single-center retrospective study.

BACKGROUND: To compare the early and late postoperative outcomes of chordal reconstruction (CR) and quadrangular resection (QR) in patients with posterior mitral valve prolapse (PMPL). METHODS: Between January 2008 and December 2018, 305 patients with PMPL who underwent mitral valve plasty (MVP) were included in this retrospective analysis. The CR and QR procedures were performed in 169 patients (CR group) and 136 patients (QR group), respectively. Early and late postoperative outcomes were compared between the groups. RESULTS: Follow-up was complete in 96.4% (294/305) of patients, with a mean follow-up of 81.2 ± 30.4 months. No 30-day mortality was observed in any of the patients. The success rate of the mitral valve repair was similar in both groups (99.4% vs. 98.5%, P = 0.850). The incidence of early postoperative hemolysis was lower in the CR group than in the QR group (0.00% vs. 3.0%, P = 0.024). Postoperative left ventricular end-diastolic diameter (LVEDD) decreased more significantly in the CR group than in the QR group at 3 months (8.15 [1.30,12.65] vs. 3.25 [- 0.05, 8.75] mm, P < 0.001). During follow-up, the overall survival rates were 95.1% and 94.6% in the CR and QR groups, respectively. The incidence of reoperation for moderate or severe mitral regurgitation (MR) was similar in both groups (4.3% vs.5.4%, P = 0.653), but the time interval between the initial operation and reoperation was shorter in the QR group than in the CR group (84.3 ± 36.1 vs. 120.9 ± 27.6 months, P = 0.026). The LVEDD enlargement was more significant in the QR group than in the CR group (4.5 [3.6, 4.5] vs. 2.4 [1.3, 2.8] mm, P < 0.001). CONCLUSION: CR and QR are effective techniques for patients with PMPL. Both techniques resulted in a low incidence of recurrent MR. However, CR can reduce early postoperative hemolysis and LVEDD more significantly. During the long-term follow-up, reoperations due to recurrent MR were performed at a longer interval after the initial operation. LVEDD expansion was better avoided in the CR group.

Novel Automated Suturing Technology for Minimally Invasive Mitral Chord Implantation: A Preclinical Evaluation Study.

OBJECTIVE: This study evaluated the ergonomics and time requirements of using a novel automated suturing and titanium fastener deployment technology for chordal replacement in human heart specimens in open and minimally invasive cardiac surgery (MICS) simulators. METHODS: Five cardiac surgeons used novel, manually powered expanded polytetrafluoroethylene (ePTFE) suturing devices to automate suture placement between mitral leaflets and papillary muscles in explanted cadaver hearts, along with customized titanium fastener delivery devices to secure suture and trim suture tails. This mitral chordal replacement test was conducted using surgical models simulating open and MICS mitral repair access. The study was approved by the institutional ethical board. RESULTS: After a brief introduction to this technique using plastic models, study surgeons performed 48 chordal replacements in human mitral valves, placing 18 in an open model and 30 in a right minithoracotomy model. The time range to complete a single chordal replacement was between 55 s and 8 min, with an overall mean duration of 3.6 ± 1.5 min. No difference in duration of implantation was recorded for the MICS and open sternotomy simulators used. Good control of suture delivery was reported in 95.8% (n = 46) of leaflet aspect of the sutures and in 100% (N = 48) of papillary muscle sutures. CONCLUSIONS: Automated mitral chordal ePTFE suturing simulated through open and MICS access demonstrated quality handling and accurate placement of sutures in human heart specimens. A clinical trial using this technology is currently ongoing. This innovation may present an important advance facilitating enhanced minimally invasive mitral valve repair.

Cutting the second order chords during mitral valve repair.

The chordae tendinae connect the papillary muscles (PMs) to the mitral valve. While the first-order chordae serve to secure the leaflets to maintain valve closure and prevent mitral valve prolapse, the second-order chordae are believed to play a role in maintaining normal left ventricle size and geometry. The PMs, from where the chordae tendinae originate, function as shock absorbers that compensate for the geometric changes of the left ventricular wall. The second-order chordae connect the PMs to both trigons under tension. The tension distributed towards the second-order chordae has been demonstrate to be more than threefold that in their first-order counterpart. Cutting the second-order chordae puts all the tension on the first-order chordae, which are then closer to their rupture point. However, it has been experimentally demonstrated that the tension at which the first-order chordae break is 6.8 newtons (N), by far higher than the maximal tension reached, that is 0.4 N. Even if the clinical reports have been favorable, the importance of cutting the second-order chordae to recover curvature of the anterior leaflet and increase the coaptation length between the mitral valve leaflets has been slowly absorbed by the surgical world. Nevertheless, there are progressive demonstrations that chordal tethering affects the anterior leaflet not only in secondary, but also in primary mitral regurgitation, having a not negligible role in the long-term outcome of mitral repair.

Mitral valve repair with artificial chords: Tips and tricks.

Mitral valve regurgitation (MR) is a common valvular disorder occurring in up to 10% of the general population. Mitral valve reconstructive strategies may address any of the components, annulus, leaflets, and chords, involved in the valvular competence. The classical repair technique involves the resection of the prolapsing tissue. Chordal replacement was introduced already in the '60, but in the mid '80, some surgeons started to use expanded polytetrafluoroethylene (ePTFE) Gore-Tex sutures. In the last years, artificial chords have been used also using transcatheter approach such as NeoChord DS 1000 (Neochord) and Harpoon TSD-5. The first step is to achieve a good exposure of the papillary muscles that before approaching the implant of the artificial chords. Then, the chords are attached to the papillary muscle, with or without the use of supportive pledgets. The techniques to correctly implant artificial chords are many and might vary considerably from one center to another, but they can be summarized into three big families of suturing techniques: single, running or loop. Regardless of how to anchor to the mitral leaflet, the real challenge that many surgeons have taken on, giving rise to some very creative solutions, has been to establish an adequate length of the chords. It can be established based on anatomically healthy chords, but it is important to bear in mind that surgeons work on the mitral valve when the heart is arrested in diastole, so this length could fail to replicate the required length in the full, beating heart. Hence, some surgeons suggested techniques to overcome this problem. Herein, we aimed to describe the current use of artificial chords in real-world surgery, summarizing all the tips and tricks.